About fluidicice

Australia.

The Preparedness Encyclopedia

Since I first began researching preparedness I’ve been concatenating what I know into an Excel sheet to help refresh my mind when I need to remember what I’ve previously learnt. For example if I forget what ratio of Calcium Hypochlorite I need to add to water for the initial solution.

Preparedness Categories
Fig1. – The categories in The Preparedness Encyclopedia.

Each section seen above has a link you can click to jump to the section shown as well as subheadings when you get there to jump even further into the content you are looking for. An example being “Water > Acquiring Water”. The aim is to find any information you are looking for quickly and easily. Alternatively you could also use “Ctrl + F” to search for what you want if the wording is precise.

There are 11 columns of space of information, I chose this number because there are a lot of “10” row data fields and I usually add a description in the first column to give context about the row. There is also another 11 rows beyond the divider in the middle to allow for comments, discussion and answers which is used in the Entertainment section. Overall the column number goes to “AC” after which it’s then cut off to prevent unnecessary scrolling.

This document has slowly been growing over the past few months until now where it’s 10Mb. I carry this around on my phone at all times because you’ll never know when the information will come in handy.

As of today (2nd May 2018) there are 70 categories such as Water, Cooking, Barter, Foraging, Animal Identification, Homesteading, Gear, Fuel, Weapons, Medical and 60 more.

Each category has a percentage that it’s complete which I update as I fill in more information in that section. When every section is 100% the encyclopedia will be complete. I will however be disseminating the guide prior to completion as I will need assistance finishing it.

Up until now I’ve spent about 1573.25 hours compiling it which is calculated from the number of cells I have that contain information and using the assumption that each cell takes 1 minute to complete. Noting that that may be an overestimation I often come back to cells and edit the information and many of the cells take well over 1 minute to complete, so it averages out.

Unfortunately the document has been corrupted twice already in the past few months which is horrifying when it happens as I’ve spent so much time on this, but both times I’ve managed to recover it (or most of it). Therefore I now wish to blog my progress and upload parts of the guide so I always have an online backup to fall back on.

The first corruption I believe was due to it being saved incorrectly on my USB, which was fairly easily recovered by the built-in excel recoverer. After that terrifying moment I backed up the document 7 times as it was the only copy I had at the time. The second corruption I have no idea how it happened but when I tried to open it on my Windows 10 pc (As I usually edit it on a vista pc), it said it was unreadable and then proceeded to ERASE the file and ALL the 6 other backups I had on the USB. So now I’ve learnt my lesson to have off-USB backups as well. I had to use “Recuva” a brilliant program for recovering deleted and deep files from drives that are invisible to the eye.

After those panic attacks, I’m happy to say I now back them up online as well as on multiple PCs and USB’s, so I’d like to see it corrupt now. At most I can only lose one day’s worth of work.

Currently I’m working on the “Plant Identification” section which by far is the biggest with over 5,400 rows. I have recently added the name of every edible plant known on the planet and it’s scientific name. The next step is to find the information for each plant such as Physical Characteristics, Habitats, Known Hazards, Edible Parts, Medicinal Uses, Pictures and more. At this rate if I add 50 plants a day it would take 108 days to complete them all and it takes about 3 minutes to do a row. (That’s 270 hours to complete them all)

So that’s the simple introduction to TPE, if you wish to help add information to the article please let me know, although I’m not yet giving out the guide until it’s a little further along. I’m also unsure about the title of the guide, perhaps something without “The” at the start to use it more fluently in sentences.

A Change In Lifestyle

It’s been three or so years since my last post and quite a lot has changed since then, I was into technology, pc games and buying the latest tech gear and reviewing it. However recently I’ve seen how much of a time waster games are and have been investing my time more into learning about the world, economy and particularly preparedness.

It started back in 2015 when I took a trip to America and saw the completely different lifestyle my friends they had over there, in particular prepping for disasters. After some inquisition I soon realized that this world is incredibly fragile and could come crashing down at any point and usually when people least expect it. An example is the “Just In Time” restocking methodology for shops which only have three days worth of food stocked for their immediate region.

Now what if everyone in the local areas realized a cyclone was heading towards their location? Such as Hurricane Katrina. The shelves will go bare, there will be fights of food and gangs in the streets looking for anything worth looting as the police are pre-occupied with all the other violence in the region. There will be nobody to turn to and you will have to sustain and protect yourself.

This is what could happen anywhere on the planet, and it’s not even anywhere near one of the worse disasters that could occur…

This was my short introduction to the coming posts and the content they will appear on my website. I already have multiple projects that I’ve done which I need to post – which even include pictures and instructions on how to follow along if you wish to do so. It’s the first of May 2018 today and I thought what better day to start the first post than today, and I will strive to post every business day.

I also aim to redo the entire website and remove any irrelevant content not focusing on my current interests. Although I will continue to try to post new music and especially photographs as those are my other much enjoyed hobbies. I would now call myself a “Prepographer” – A photographer and prepper, or photographer of anything preparedness related.

Fallout 4 widescreen lighting fix

Fallout 4 has just been released and I’ve been stuck fighting a lighting issue rather than raiders due to stretching the game to widescreen, a massive 3440×1440 due to having an LG ultra-wide monitor, the 34UM95. I’m not sure if this happens with smaller 21:9 widescreens notably 2560×1080, but the lighting has been confirmed to break with a resolution of 5760×1080.

This error typically only happens indoors where there’s a lot of shadows and lights within a small area, but it’s incredibly annoying as it takes up a good third of the screen.

I’m not even sure why Bethesda didn’t support ultra-wide monitors in the resolution selection but there are quite a few of us out there with larger unconventional monitors. To even get the game to run in fullscreen on my monitor I went into ‘Documents’ > ‘My Games’ > ‘Fallout 4’ and then edited the Fallout4Prefs.ini fields to this:

iSize H=1440
iSize W=3440

The above directory is on windows 7 and may differ if you have an alternate operating system.

Now to fix the lighting. If you’re using an ultra-widescreen monitor with Fallout 4 you’ll have go into the ‘Prefs’ file like above and set:

bComputeShaderDeferredTiledLighting=0

Here’s some screenshots of the lighting surface that appears amidst some lights:

Fallout 4 Lighting
Fig1. – The lighting surface error in Fallout 4.
Fallout 4 Lighting
Fig2. – The lighting inside a Concord building.
Fallout 4 Lighting
Fig3. – How the lighting should look instead of the above image.

There will still be a couple of bugs in the game such as the sniper scope image below, but the lighting one is the most noticeable.

Fallout 4 Lighting
Fig4. – The sniper scope screen.

Klipsch s4a/s4i Earphones Review

Headphones and earphones, there are plenty of brands that make them but few that stand out from the others and boldly go where few dare to venture. Klipsch surely is one of those brands leading the charge for the advancement of earphone-kind everywhere with their stellar emphasis on detail and quality, they can surely make a set of earphones.

Continue reading

Pokemon Gen 3 Team Randomizer

So I’ve recently been indulging myself in some heated online pokemon battles with a friend, which often includes a side bet or two if we manage to acquire streaks. She’s quite a bit better then me so I figured I would even the odds with a new game mode we can play that’s down to chance a little more then skill, where you can random any generation 3 pokemon which has literally any ability or moves of another pokemon.

Continue reading

Buttkicker LFE Review

Without prior knowledge, you may think that the Buttkicker is some form of new-fangled electronic device which would kick your butt after you’ve been playing video games for too long. Alas, as good as that would be – you’re not far off from the truth. The Buttkicker is a tactile transducer which converts audio signals (especially deep bass) into rumbling or vibration for the enhancement of digital media, games and simulations. It’s essentially just a bigger vibration (rumble pak) that modern game controllers come with which you can strap to your chair, lounge seat or even your bed to provide the same experience to your whole body! It provides a much needed new level of immersion, intensity and realism to otherwise seemingly dull gaming experiences. But just to quell your excitement right now – No, it can’t be used as a ‘vibrator’… it would kill you.
Continue reading

Budtrol Tv/Gaming Stand Review

This purchase has been long overdue due to my build-up of basically every console I’ve ever played and no place to store them all conveniently. If you’re interested I currently own an Original Xbox, Wii with a Gamecube built in, Playstation 1 and a few Nintendo 64’s (One is RGB modded in an ice-blue case and a custom blue power LED). The best part is that they all fit onto my Budtrol Tv stand nicely with my framemeister XRGB and an S-video switch with room left over for more consoles if I ever purchase one by adding another tray.
Continue reading